Abstract

In beam shaping applications, the minimization of the number of necessary optical elements for the beam shaping process can benefit the compactness of the optical system and reduce its cost. The single freeform surface design for input wavefronts, which are neither planar nor spherical, is therefore of interest. In this work, the design of single freeform surfaces for a given zero-étendue source and complex target irradiances is investigated. Hence, not only collimated input beams or point sources are assumed. Instead, a predefined input ray direction vector field and irradiance distribution on a source plane, which has to be redistributed by a single freeform surface to give the predefined target irradiance, is considered. To solve this design problem, a partial differential equation (PDE) or PDE system, respectively, for the unknown surface and its corresponding ray mapping is derived from energy conservation and the ray-tracing equations. In contrast to former PDE formulations of the single freeform design problem, the derived PDE of Monge–Ampère type is formulated for general zero-étendue sources in Cartesian coordinates. The PDE system is discretized with finite differences, and the resulting nonlinear equation system is solved by a root-finding algorithm. The basis of the efficient solution of the PDE system builds the introduction of an initial iterate construction approach for a given input direction vector field, which uses optimal mass transport with a quadratic cost function. After a detailed description of the numerical algorithm, the efficiency of the design method is demonstrated by applying it to several design examples. This includes the redistribution of a collimated input beam beyond the paraxial approximation, the shaping of point source radiation, and the shaping of an astigmatic input wavefront into a complex target irradiance distribution.

© 2017 Optical Society of America

Double freeform illumination design for prescribed wavefronts and irradiances

Christoph Bösel and Herbert Gross
J. Opt. Soc. Am. A 35(2) 236-243 (2018)

Ray-mapping approach in double freeform surface design for collimated beam shaping beyond the paraxial approximation

Christoph Bösel, Norman G. Worku, and Herbert Gross
Appl. Opt. 56(13) 3679-3688 (2017)

Freeform lens design for a point source and far-field target

L. B. Romijn, J. H. M. ten Thije Boonkkamp, and W. L. IJzerman
J. Opt. Soc. Am. A 36(11) 1926-1939 (2019)

Double freeform surfaces design for beam shaping with non-planar wavefront using an integrable ray mapping method

ShiLi Wei, ZhengBo Zhu, ZiChao Fan, YiMing Yan, and DongLin Ma
Opt. Express 27(19) 26757-26771 (2019)

Ray mapping approach for the efficient design of continuous freeform surfaces

Christoph Bösel and Herbert Gross
Opt. Express 24(13) 14271-14282 (2016)