Abstract

The usual differential method for solving the grating problem in the H_|| case is shown to be unable to predict the efficiencies of blazed gratings in a reliable manner. Its predictions are compared with those obtained using the integral method developed by Maystre, a reliable method that has shown its validity over a wide range of applications. The efficiencies of sinusoidal gratings as a function of angle of incidence are calculated by both methods for two values of the groove-height-to-period ratio. For 0.05 (low modulations) both formalisms yield similar results, but for 0.2 only a qualitative agreement is observed. The differential method is shown to involve an approximation valid only for low-modulated surfaces, a fact that accounts for the observed discrepancies. As a self-consistency test, the fulfillment of the electromagnetic boundary conditions is checked by calculating the jumps of the field components, which should be continuous at the grating surface.

© 1987 Optical Society of America

Solving conical diffraction grating problems with integral equations

Leonid I. Goray and Gunther Schmidt
J. Opt. Soc. Am. A 27(3) 585-597 (2010)

Perfectly conducting diffraction grating formalisms extended to good conductors via the surface impedance boundary condition

Ricardo A. Depine
Appl. Opt. 26(12) 2348-2354 (1987)

Numerical integration schemes used on the differential theory for anisotropic gratings

Koki Watanabe
J. Opt. Soc. Am. A 19(11) 2245-2252 (2002)

Corrugated diffraction gratings in uniaxial crystals

Ricardo A. Depine and Marina E. Inchaussandague
J. Opt. Soc. Am. A 11(1) 173-180 (1994)

Diffraction efficiencies for the higher orders of a reflection grating in the soft x-ray region: comparison between theory and experiment

Werner Jark and Michel Neviere
Appl. Opt. 26(5) 943-948 (1987)